Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Oil & gas facilities

Pipelines

Pipeline automation connects field instruments, valve stations, pumping/compressor stations, metering, leak/pressure information and central supervision. SMEC supports PLC/RTU/SCADA integration, instrumentation, communications interfaces, electrical controls, brownfield migration and remote asset monitoring.

Large flanged pipelines running towards a processing plant, its columns and pipe racks lit by a low sun
Pipelines

Typical scope

  • RTU/PLC panels and remote stations
  • SCADA/HMI integration
  • Valve and actuator control interfaces
  • Metering and instrumentation
  • Pump/compressor station controls
  • Protocol conversion and communications integration
  • NexWave remote monitoring where approved
  • Lifecycle migration of obsolete RTUs/PLCs

Project evidence

  • Case studyPetroleum installation

    Petroleum Installation — Automatic Fire Fighting System with Redundant SIL PLC and SCADA

    Problem · SMEC scope · Architecture · Testing
    Problem
    The facility needed an automatic fire fighting system where a failure in the suppression logic, signal loss over long cable runs, inconsistent pressure data or a clogged solenoid valve could not be allowed to compromise the response to a fire.
    SMEC scope
    SMEC supplied and installed redundant SIL PLC control panels integrated with a SCADA system, signal, control and optical fiber cabling, pressure transmitters and solenoid valves, and carried out the civil works — cable trays and panel foundations — within the timeline.
    Architecture
    Dual-redundant SIL-rated PLC panels with automatic switchover on panel or logic failure, integrated with SCADA; cabling and fiber routed to minimise EMI between valves, transmitters and PLCs; solenoid valves with upstream strainers and filters.
    Testing
    Pressure transmitters calibrated to OEM standards and verified through simulation testing; the system was erected, tested and commissioned, and the client certified the work complete.
  • Case studyOil and gas facilities, including a remote Zone 1 well site

    Oil & Gas Facilities — Retrofit Solutions and Advanced Control Systems

    Problem · SMEC scope · Architecture · Testing · Outcome
    Problem
    Ageing equipment and harsh, hazardous environments: an outdated MCC that had to be retrofitted live, multi-gas detection in Zone 1 areas, a BOP control system on ageing infrastructure, and a remote well site needing reliable telemetry with minimal on-ground supervision.
    SMEC scope
    SMEC retrofitted an MCC with LSIG-configured ACBs, digital motor protection relays and Form 4B panels in a phased retrofit with no downtime; delivered a Gas Watch Panel with SIL-2 sensors and 2oo3 voting; developed primary and secondary injection test kits for protection systems; designed, installed and commissioned a PLC-based BOP control system with ring-topology networking; and built a custom RTU panel for the well site.
    Architecture
    RTU panel in a Zone 1-certified IP66 flameproof enclosure, with redundant 24VDC UPS-backed power, Modbus RTU/TCP and DNP3, fail-safe DI/DO with watchdog timers, data buffering and timestamped event logging, and secure VPN remote access.
    Testing
    RTU panel FAT-tested by SMEC; Gas Watch Panel components verified before deployment.
    Outcome
    RTU panel: seamless SCADA integration across 40+ km of pipeline infrastructure, and on-site intervention reduced by 65%.

Common questions

What scope can SMEC support for Pipeline SCADA, RTU & Automation Engineering?

SMEC can support the electrical, instrumentation, automation, control, integration, modernization, testing and commissioning elements described on this page, subject to the agreed project boundary.

Can SMEC work with an existing multi-OEM installed base?

Yes where the required technical information, access, interfaces and project approvals are available. Compatibility and scope boundaries are assessed before execution.

What information is needed to quote?

Send the asset or project, existing make/model where relevant, drawings or specification, required scope, site, required date and any shutdown or mobilization constraint.

Engineering solutions for this industry

Related industries

Have a Pipelines project to discuss?

Share the existing equipment, drawings, project location and scope of work.

Send the station list, existing SCADA/RTU architecture and communications philosophy. Recommended RFQ inputs: project/asset, existing OEM/model, scope, drawings or specification, required date, site location, and any shutdown/mobilization constraint.

Submit RFQ