Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Product system

Flare Boom Pilot Ignition System

High-Energy Pilot Ignition. Multi-Pilot Control. Engineered for Offshore & Onshore Flare Systems.

SMEC provides Flare Boom Pilot Ignition System engineering, integration and retrofit solutions for offshore drilling rigs, production facilities and industrial flare installations.

Designed around the installed flare and pilot arrangement, SMEC's ignition packages can incorporate high-energy ignition (HEA) modules, ignition electrodes, high-voltage cables, hazardous-area junction boxes, control panels and local or remote operating interfaces.

From new installations to obsolete ignition-system replacements, SMEC supports project-specific pilot ignition engineering, equipment integration, testing and commissioning.

  • High-Energy Ignition
  • Flare Pilot Control Panels
  • Multi-Pilot Ignition
  • System Retrofits
An SMEC flare ignition package laid out: an open stainless panel with four ignition modules, a control box with push buttons, a junction box with cable glands, ignition probes and two high-energy ignition units

Flare Pilot Ignition Engineered for the Installation

Ignition Where It Matters. From Control Panel to Pilot.

Flare pilot ignition systems deliver controlled ignition energy to designated pilot ignition points.

Reliable operation depends on the ignition technology, pilot compatibility, electrical interfaces, cable routing, environmental conditions and installed control arrangement.

SMEC engineers flare ignition packages to suit the specified pilot configuration, operating requirements and site conditions.

Flare Boom Pilot Ignition System Features

  • High-energy ignition modules and ignition interfaces
  • Single-pilot and multi-pilot configurations
  • Ignition electrodes and associated cable assemblies
  • Hazardous-area junction and control-panel options
  • Local and remote ignition command interfaces
  • Manual and automatic ignition sequences, where specified
  • Ignition-system status and fault indication
  • Pilot flame-detection interfaces, where included
  • PLC/SCADA integration options
  • Existing flare ignition system upgrades and replacements

Available functions depend on the selected equipment, pilot design and approved project requirements.

How the Flare Pilot Ignition System Works

1. Ignition Command

An approved local or remote control interface initiates the configured pilot ignition sequence.

2. Ignition Energy Generation

The ignition module generates electrical energy for the designated ignition device.

3. Energy Transmission

Suitable ignition cables and field interfaces deliver the ignition energy to the installed ignition point.

4. Pilot Ignition & Monitoring

The ignition device initiates ignition of the pilot fuel mixture. Where specified, an independent flame-detection arrangement provides pilot flame-status feedback.

Flare Pilot Ignition System Components

ComponentTypical Function
High-Energy Ignition ModuleGenerates ignition pulses for a compatible ignition device
Ignition Electrode / TipProvides the ignition point for the pilot fuel mixture
Ignition CableTransfers ignition energy to the installed ignition device
Junction BoxesProvide field electrical connections suited to the installation
Ignition Control PanelManages approved commands, indications and ignition sequences
Local / Remote StationProvides designated operator controls
Pilot Flame-Detection InterfaceReceives flame-status information where configured
PLC / SCADA InterfaceExchanges approved system status, alarms and control signals

Flare Pilot Ignition System Upgrades & Retrofits

Existing Flare System. Obsolete Pilot Ignition Equipment?

SMEC can assess existing flare pilot ignition installations for:

  • Replacement of ageing ignition modules and control panels
  • Ignition electrode and cable-system upgrades
  • Multi-pilot ignition control modifications
  • Local and remote operating-interface modernisation
  • Alarm, status and flame-detection interface integration
  • Electrical troubleshooting and ignition-system retrofit engineering

Existing pilot burners and flare structures may be retained where compatible and approved.

Discuss a Flare Pilot Ignition Retrofit

Industrial Applications

  • Offshore Drilling Rigs
  • Flare Boom Installations
  • Oil & Gas Production Facilities
  • Refineries
  • Petrochemical Plants
  • Onshore Flare Systems

SMEC Engineering, Testing & Commissioning

SMEC supports ignition-system assessments, electrical and control-panel engineering, ignition-device interfacing, cable and junction-box integration and technical documentation.

Depending on project scope, services may include Factory Acceptance Testing (FAT), installation support, Site Acceptance Testing (SAT), ignition functional checks and commissioning assistance.

Ignition performance, flame-detection arrangements, equipment certification and applicable flare-system requirements must be verified for the approved installation.

Frequently Asked Questions

What is a flare pilot ignition system?

A flare pilot ignition system provides the means to ignite designated pilot burners used in industrial flare installations. Depending on its design, it includes ignition equipment, field connections, control panels and operator interfaces.

What is a high-energy flare pilot ignition system?

A high-energy ignition system uses an electrical ignition module and a compatible ignition device to generate sparks for igniting the pilot fuel mixture. The exact ignition arrangement and performance depend on the selected technology and pilot design.

Can SMEC support multiple flare pilots?

SMEC can engineer multi-pilot ignition control arrangements, with individual ignition channels and interfaces configured according to the number of pilots and approved control requirements.

Can an existing flare pilot ignition system be upgraded?

Yes, subject to technical assessment. SMEC can evaluate existing ignition modules, control panels, field wiring and operator interfaces for compatible upgrades or replacement.

Does the ignition system include pilot flame detection?

Pilot flame-detection interfaces can be incorporated where specified. The actual flame-detection equipment, monitoring method and automatic re-ignition functions must be established in the approved project scope.

What information is required for a flare pilot ignition quotation?

Share the flare type, number of pilots, existing ignition-system make/model, pilot design, ignition-point arrangement, cable distances, power supply, hazardous-area classification, control requirements and installation location.

Other SMEC systems

Every system is built to the rig it serves and integrated with the rest of the installation.

All systems

Request a Flare Pilot Ignition Technical Quotation

New Ignition Package? Existing Flare Boom Retrofit? Obsolete Ignition Controls?

SMEC can review the installed flare pilot arrangement and develop a project-specific ignition-system engineering and integration proposal.

Submit RFQ