Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Electrical & Automation

Panel Engineering & Manufacturing

SMEC engineers and manufactures project-specific control and electrical panels, integrating approved PLCs, protection, drives, starters, power supplies, networking and terminal interfaces. Panels should be sold as engineered systems with drawings, testing and commissioning support — not as sheet-metal assemblies.

A welder fabricating a steel panel base frame in the SMEC workshop
Panel Engineering & Manufacturing

Control Panels Built for the Job Beyond the Workshop.

An industrial panel is more than an enclosure filled with components. Its protection, thermal design, wiring, communications and operating logic must suit the equipment it controls and the environment in which it works. SMEC supports engineering, assembly, integration and FAT of electrical, automation and specialised control panels.

The portfolio spans MCC/PCC, PLC/SCADA, VFD, APFC/AMF, synchronisation, RTU, safety-related, drilling, marine and equipment-control applications.

Explore engineering capabilities

Panel types

  • PLC/control panels
  • MCC/PCC and starter panels
  • VFD/drive panels
  • Package-control panels
  • Marshalling/interface panels
  • UPS/DC and battery-charger panels

Deliverables

GA, SLD/control schematics, BOM, terminal plan, I/O/interface drawings, software/configuration where applicable, FAT records and as-built documentation.

Applications & Systems

Select a related system to open its dedicated product or system page.

Project Evidence

Oil & Gas Control Panel Package — PLC, MCC and VFD Integration

An industrial project required engineered electrical and automation panels for multiple equipment packages. The project summary covers panel design, fabrication, wiring, interface checks and factory testing.

  • Case studyOffshore drilling rig

    Offshore Rig — 1350 HP Top Drive VFD System Panel

    Problem · SMEC scope · Architecture · Testing
    Problem
    An offshore operator needed a high-capacity 1350 HP top drive VFD system panel that would deliver precise control and survive extreme drilling conditions from -20°C to +50°C, plugging into the existing rig power and control systems with no margin for retrofit errors offshore.
    SMEC scope
    SMEC supplied and installed the complete top drive VFD system in a 20-ft container: drive section, auxiliary section, distribution panel with step-down transformer, PLC section and plug panels for all incoming and outgoing feeders.
    Architecture
    Oil-cooled heavy-duty VFD on a 600 VAC, 1800 A, 3-phase supply, with custom drive tuning, harmonic filters and surge protection; segregated drive, PLC and auxiliary zones; dual redundant 5-ton AC units under PLC cooling control; multi-point fire detection linked to ESD logic, and PLC alarms for temperature, humidity and doors.
    Testing
    Full logic tested before deployment, and FAT simulated with the client before shipment.

Engineering Approach — From electrical design to a testable manufactured panel

Panel engineering begins with duty, electrical ratings, fault levels, heat dissipation, enclosure conditions and the intended control architecture. These inputs shape the component selection, internal layout, wiring arrangement, terminal allocation and inspection plan.

Manufacturing is only one stage. Drawing checks, material inspection, wiring verification, insulation and functional tests, interface simulation and documented FAT are what make a panel suitable for integration into an EPC or operating-site package. The acceptance scope must match the actual project specification.

Common questions

Can power and automation panels be supplied as one package?

Yes, where defined in the RFQ. Combined scopes may include MCC/PCC, VFD, PLC, RTU, metering and safety-related interface panels.

Can panels be designed for marine or hazardous environments?

Environmental conditions, enclosure ratings, component suitability and applicable certifications must be defined and verified for each application.

What documents are needed for quotation?

SLD, BOQ, panel quantities, ratings, I/O list, specifications, environmental conditions and inspection requirements.

Have a Panel Engineering project to discuss?

Share the existing equipment, drawings, project location and scope of work.

Send the SLD/schematic, I/O, load list and enclosure/environment specification. Recommended RFQ inputs: project/asset, existing OEM/model, scope, drawings or specification, required date, site location, and any shutdown/mobilization constraint.

Submit RFQ