Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Product system

Jack-Up Rig Jacking Control & Rack Phase Difference (RPD) Monitoring Systems

Coordinated Jacking Control. Precise RPD Monitoring. Engineered for Rig Modernisation.

SMEC provides Jack-Up Rig Jacking Control Systems and Rack Phase Difference (RPD) Monitoring Solutions for offshore self-elevating drilling rigs.

Our engineering capabilities cover PLC-based jacking controls, motor and brake interfaces, central operator consoles, leg-position monitoring, RPD measurement, alarms and system modernisation.

From new control-system integration to legacy jacking system retrofits, SMEC supports project-specific electrical, automation and monitoring requirements around existing jack-up machinery.

  • Jacking Control Systems
  • RPD Monitoring
  • PLC/HMI Upgrades
  • Rig Life Extension
A jack-up rig control room: a yellow jacking console with two screens, rows of push buttons and joysticks, stainless control cabinets and an RPD rack, with a jack-up rig at sea seen through the window

Jacking Control Systems for Offshore Jack-Up Rigs

Coordinated Control Across Motors, Brakes and Rig Legs

Jack-up rig elevation requires coordinated operation of jacking motors, drives, braking systems and leg-position interfaces.

SMEC engineers jacking control systems around installed machinery, approved operating sequences and existing OEM interfaces.

Jacking Control Capabilities

  • PLC-based jacking control and central operator HMI
  • Electric motor and drive-control interfaces
  • Hydraulic jacking control interfaces, where applicable
  • Motor-group sequencing and operating permissives
  • Brake-release logic and status monitoring
  • Leg-position, speed and selected load-related feedback
  • Alarm, fault and diagnostic monitoring
  • Existing jacking control system upgrades and retrofits

Control functions depend on the approved jacking machinery configuration, operating philosophy and project requirements.

Rack Phase Difference (RPD) Monitoring System

Different Rack Positions. Critical Information During Jacking.

Rack Phase Difference (RPD) is the relative vertical displacement between corresponding rack positions on different chords of a jack-up rig leg.

Monitoring RPD helps operators identify differential movement between leg chords during jacking operations and assess the condition against defined operating limits.

SMEC's RPD monitoring solution provides measurement and operator indication of rack phase differences, supporting controlled jacking operations and monitoring of leg-chord displacement.

RPD Monitoring Capabilities

  • Rack phase measurement using compatible daisy-wheel sensor arrangements
  • Individual leg-chord position measurement
  • Rack Phase Difference calculation and display
  • Monitoring across multiple jack-up rig legs
  • Operator indication of relative chord displacement
  • Configurable warning and alarm interfaces
  • Integration with jacking console and monitoring displays
  • Sensor, controller and display modernisation

For a typical three-leg jack-up rig with three monitored chords per leg, the configuration may use nine sensing positions. Final sensor arrangements depend on the rig design.

RPD alarm limits and protective responses must follow the approved rig-specific operating requirements.

Jacking Control & RPD System Architecture

System ComponentTypical Function
Central Jacking Control ConsoleOperator commands, equipment status and alarms
PLC & Remote I/OJacking control logic and machinery interfaces
Motor & Drive InterfacesMotor-group sequencing, operating feedback and diagnostics
Brake Control InterfacesBrake status, release permissives and fault monitoring
Leg Position MonitoringLeg movement and position-related information
RPD SensorsMeasurement of individual rack-chord displacement
RPD Monitoring ControllerSignal processing and differential position calculations
RPD Display & AlarmsOperator indication, warnings and diagnostic information

How the Systems Work Together

1. Jacking Control

The central control system coordinates approved motor, drive and brake operations during rig elevation and lowering.

2. Position & RPD Measurement

Leg-position and RPD sensors provide measurement information about relevant rig-leg movement and relative chord displacement.

3. Operator Monitoring

The jacking console displays operating conditions, machinery feedback, RPD values and configured alarms.

4. Operating Limits & Interlocks

Control permissives, alarms and any approved protective responses are implemented according to the rig's operating philosophy and validated control design.

Jacking Control & RPD System Upgrades

Modernise Existing Controls. Retain Compatible Jacking Machinery.

SMEC supports the assessment and modernisation of existing jacking control and monitoring installations, including:

  • Replacement of obsolete jacking PLCs and HMIs
  • Central jacking console modernisation
  • Motor, drive and brake-control interface upgrades
  • RPD sensor and monitoring-system upgrades
  • Leg-position monitoring integration
  • Alarm, diagnostic and event-monitoring improvements
  • Integration with compatible existing OEM machinery

Existing motors, gearboxes, brakes and other mechanical equipment may be retained where technically suitable and approved.

Discuss a Jacking Control or RPD Retrofit

Applications

  • Offshore Jack-Up Drilling Rigs
  • Jacking Control Modernisation
  • RPD Monitoring Upgrades
  • Rig Refurbishment
  • Rig Reactivation
  • Rig Life Extension

SMEC Engineering, Testing & Commissioning

SMEC supports jacking control and RPD monitoring assessments, PLC/HMI engineering, sensor and machinery interfaces, panel integration, system configuration and project-specific documentation.

Depending on the approved scope, services may include Factory Acceptance Testing (FAT), functional simulation, installation support, Site Acceptance Testing (SAT), commissioning and lifecycle technical assistance.

Machinery protection, emergency-stop arrangements, RPD operating limits and safety-related control functions require appropriate engineering verification and approval.

Frequently Asked Questions

What is a jack-up rig jacking control system?

A jacking control system coordinates the machinery used to raise and lower a jack-up rig relative to its legs. Depending on the equipment design, it integrates motor and drive controls, braking interfaces, operating interlocks, leg-position information and operator monitoring.

What is an RPD monitoring system?

A Rack Phase Difference monitoring system measures relative vertical displacement between corresponding rack positions on different chords of a jack-up rig leg. It provides operators with information and alarms for assessing differential chord movement during jacking operations.

What is the difference between Jacking Control and RPD Monitoring?

Jacking Control manages approved machinery commands, motor operation, braking and interlocks. RPD Monitoring measures and indicates relative displacement between rack chords. The systems can be integrated for operator visibility, but their functions remain distinct.

Can SMEC upgrade an existing jacking control and RPD system?

Yes. SMEC can assess existing PLCs, operator consoles, control interfaces, RPD sensors and monitoring equipment for modernisation or replacement, subject to OEM compatibility and engineering requirements.

Does an RPD system automatically stop jacking operations?

Not necessarily. An RPD system may provide measurement, indication and alarms. Automatic stop functions can only be claimed where they are part of an approved and validated protection arrangement.

What information is required for a quotation?

Share the jack-up rig design, jacking-system OEM, existing PLC/HMI details, number and arrangement of legs and chords, RPD sensor information, relevant drawings, identified problems and proposed upgrade scope.

Other SMEC systems

Every system is built to the rig it serves and integrated with the rest of the installation.

All systems

Request a Jacking Control & RPD Technical Assessment

Upgrading a Jacking Console? Replacing an RPD Monitoring System?

SMEC can assess existing jacking control and RPD monitoring arrangements and develop a project-specific engineering and retrofit proposal.

Submit RFQ