Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Product system

PAGA System | Public Address & General Alarm Systems

Critical Communication. Every Zone. Every Second Counts.

SMEC provides Public Address and General Alarm (PAGA) system engineering, integration and retrofit solutions for offshore drilling rigs, marine installations, oil & gas facilities, refineries and industrial plants.

Our solutions bring together central control equipment, paging stations, amplifiers, industrial loudspeakers, alarm beacons and communication interfaces to support operational announcements and emergency alarms across designated facility zones.

From new installations to legacy PAGA system upgrades, SMEC supports project-specific system architecture, equipment integration, testing and commissioning.

  • Industrial PAGA
  • Emergency Alarm Systems
  • Driller Talkback
  • Communication System Retrofits
An SMEC PAGA system laid out on white: an open equipment rack beside a horn loudspeaker, a paging desk microphone, an industrial telephone, a call point and wall stations

Public Address & General Alarm Systems for Industrial Facilities

Make Every Critical Message Reach the Right Location.

In noisy, hazardous and geographically distributed facilities, communication depends on more than speaker output.

A PAGA system must deliver prioritised announcements and alarm signals across defined zones, with suitable audibility, speech intelligibility and system availability.

SMEC engineers PAGA solutions around the facility layout, ambient noise, hazardous-area requirements, emergency response procedures and approved communication architecture.

PAGA System Features & Capabilities

  • Central PAGA controllers and equipment racks
  • Public address and emergency alarm broadcasting
  • Local and central paging stations
  • Industrial amplifiers, horn speakers and alarm beacons
  • Configurable communication zones and message priorities
  • Emergency alarm tones and announcement interfaces
  • F&G, ESD and control-room integration
  • Redundant power and control arrangements, where specified
  • Hazardous-area equipment options
  • System status, fault indication and diagnostics
  • Legacy PAGA system modernisation and expansion

Equipment certification, redundancy and available functions depend on the approved system configuration.

PAGA, Driller Talkback & Industrial Intercom

SystemPrimary Function
Public Address & General Alarm (PAGA)Broadcasts operational announcements, emergency messages and general alarms
Driller Talkback SystemSupports two-way operational communication between designated rig locations
Industrial IntercomEnables point-to-point or group communication between industrial workstations
Paging StationsAllow authorised personnel to initiate announcements
Speakers & Alarm BeaconsProvide audible and visual communication across defined areas
F&G / ESD InterfacesInitiate approved emergency alarm or announcement functions

How the PAGA System Works

1. Announcement & Alarm Initiation

Authorised paging stations, central controllers or approved external systems initiate announcements and emergency alarm signals.

2. Priority & Zone Selection

The system applies the configured message priority and distributes audio to selected communication zones or the wider facility.

3. Audio & Visual Communication

Amplifiers, loudspeakers and beacons provide the required announcements and alarms at designated locations.

4. Monitoring & Diagnostics

Configured equipment supervision, fault indications and system-status functions support maintenance and operational readiness.

PAGA System Architecture & Key Components

ComponentTypical Function
Central Processor / ControllerAnnouncement routing, alarm priorities and system control
AmplifiersAudio amplification for connected loudspeaker circuits
Paging Stations & MicrophonesAuthorised local and central announcements
Industrial Horn SpeakersAudible communication in designated operating areas
Alarm BeaconsVisual warning in specified locations
Equipment RacksHousing for controllers, amplifiers and system equipment
Power Supply & BackupDefined power availability and redundancy arrangements
F&G / ESD InterfacesApproved alarm initiation and system integration

PAGA System Upgrades & Retrofits

Existing PAGA System. Ageing Equipment or Expanding Operations?

SMEC supports the assessment and modernisation of existing industrial communication installations, including:

  • Replacement of obsolete controllers and amplifiers
  • Paging station, speaker and beacon upgrades
  • Expansion of communication zones
  • Migration from compatible legacy analogue systems
  • Backup power and redundancy improvements
  • F&G, ESD and control-system interface modernisation
  • Fault-monitoring and diagnostic enhancements

Retrofit feasibility depends on existing equipment compatibility, cable condition, acoustic coverage and approved emergency communication requirements.

Discuss a PAGA System Upgrade

Industrial Applications

  • Offshore Drilling Rigs
  • Marine Vessels
  • Oil & Gas Production Facilities
  • Refineries
  • Petrochemical Plants
  • LNG Facilities
  • Terminals
  • Industrial Plants

SMEC Engineering, Testing & Commissioning

SMEC supports PAGA system architecture, equipment selection, paging and alarm-zone configuration, electrical interfaces, panel integration and technical documentation.

Depending on the project, services may include Factory Acceptance Testing (FAT), installation support, system functional checks, Site Acceptance Testing (SAT) and commissioning.

Acoustic coverage, speech intelligibility, alarm priorities, equipment certification and required redundancy must be verified against the approved installation requirements.

Frequently Asked Questions

What is a PAGA system?

A Public Address and General Alarm (PAGA) system distributes voice announcements, emergency messages and alarm tones across designated areas of an industrial facility, offshore installation or vessel. It uses central control equipment, paging stations, amplifiers, loudspeakers and related interfaces.

What is the difference between PAGA and a driller talkback system?

PAGA is primarily designed for facility-wide or zoned announcements and emergency alarms. Driller talkback provides operational two-way communication between designated drilling rig locations. They may be integrated but perform different functions.

Can PAGA systems integrate with Fire & Gas and ESD systems?

Yes. PAGA systems can receive approved alarm-initiation signals from F&G, ESD and other facility systems. Integration must follow the emergency response philosophy, alarm priorities and applicable system requirements.

How is the number of PAGA speakers determined?

Speaker quantity and positioning depend on facility layout, communication zones, ambient noise, acoustic coverage, speech intelligibility and relevant project requirements. Speaker count alone does not establish adequate communication performance.

Can SMEC upgrade an existing PAGA system?

Yes. SMEC can assess installed controllers, amplifiers, paging stations, speakers, communication interfaces and power arrangements for modernisation or expansion, subject to equipment compatibility and technical feasibility.

What information is required for a PAGA system quotation?

Share the facility or vessel layout, noise levels if available, communication zones, hazardous-area classification, existing PAGA equipment details, required interfaces, backup-power requirements and applicable project specifications.

Other SMEC systems

Every system is built to the rig it serves and integrated with the rest of the installation.

All systems

Request a PAGA System Technical Assessment

New Emergency Communication System? PAGA Retrofit? Expanding Industrial Communication Coverage?

SMEC can assess your facility communication requirements and develop a project-specific PAGA engineering, integration or modernisation proposal.

Submit RFQ