Engineering Reference
Engineering Checklists
Plan Smarter. Engineer with Confidence.
Explore practical engineering checklists for oil & gas, offshore drilling, electrical systems, automation, safety and modernisation projects.
From initial technical assessments to testing and commissioning, find essential considerations for better project planning, risk reduction and execution readiness.

Technical Checklists
Explore the relevant engineering page or send a technical requirement. Recommended RFQ inputs: project/asset, existing OEM/model, scope, drawings or specification, required date, site location, and any shutdown/mobilization constraint.
E-House enquiry checklist
What an estimator needs before an E-House or modular electrical room can be priced. Send what exists; a partial list is still worth reviewing.
Electrical scope
- Single line diagram, or the intended distribution arrangement
- Voltage classes and system earthing
- Fault level and duration at the incomer
- Equipment list: switchgear, MCC/PCC, drives, UPS/DC, transformers
- Load list, with duty and starting method for motor loads
- Control and automation scope inside the building
Building and environment
- Internal arrangement or space envelope, and access requirements
- Ambient temperature range and solar loading
- Area classification, if any part is in a hazardous zone
- Ingress protection, fire and blast requirements
- HVAC duty, redundancy and control philosophy
Transport and site
- Transport route limits: weight, width, height, lifting arrangement
- Site location and installation interfaces (cable entries, earthing, foundations)
- Whether site installation, termination and commissioning are in scope
Project
- Project stage: FEED, tender, execution, operating, shutdown
- Required delivery date and any shutdown or mobilization window
- Applicable standards and client specifications
- Documentation, FAT and witness requirements
Gathered what you can? Send it with the enquiry — an engineer reviews the scope and replies.
Control system migration readiness checklist
Before a PLC, SCADA or DCS migration can be scoped, these are the things that decide whether the existing installation can be kept and how the cutover is planned.
Existing system
- Make, model and firmware of the existing controllers and HMI/SCADA
- Application backup: program, tags, graphics, historical configuration
- Spare-parts position and known obsolescence notices
- Fault and downtime history, with the events that triggered the review
Field and I/O
- I/O list with signal types, ranges and locations
- Condition and age of field wiring, marshalling and terminations
- Whether existing cabinets, racks and field wiring are to be retained
- Instrument and final-element list, with anything already scheduled for replacement
Interfaces
- OEM packages and third-party systems that must remain connected
- Protocols in use, and which are available on the new platform
- Safety system boundary, and whether it is in or out of scope
- Historian, reporting and any remote-monitoring interfaces
Cutover
- Available window: shutdown, turnaround, phased or hot cutover
- Acceptable loss of view and loss of control durations
- Fallback and rollback plan, and who authorises it
- FAT scope, site acceptance criteria and operator training needs
Gathered what you can? Send it with the enquiry — an engineer reviews the scope and replies.
