Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Product system

Integrated Drilling Control System for Onshore & Offshore Rigs

One Driller Console. Coordinated Rig Control. Engineered for Modernisation.

SMEC's Integrated Drilling Control System brings operator commands, machinery controls, interlocks and selected drilling equipment interfaces into a coordinated rig control architecture.

Designed for onshore and offshore drilling applications, the system can integrate approved interfaces for drawworks, top drives, mud pumps and auxiliary equipment through industrial PLCs, control networks and configurable HMI workstations.

SMEC supports new drilling control installations, legacy control system upgrades and rig automation retrofits, with engineering tailored to existing OEM equipment and operational requirements.

  • New Installations
  • Rig Control Modernisation
  • Driller Console Upgrades
  • Rig Reactivation
SMEC monitoring displays: four screens and a tablet showing engine, generator and power readouts, alarm and system-status lists, a system overview diagram and four rig camera views

Integrated Drilling Control System Features

  • Centralised driller console and HMI interfaces
  • PLC-based drilling machinery control architecture
  • Drawworks, top drive and mud pump integration interfaces
  • Configurable equipment permissives and interlocks
  • Industrial communication networks and remote I/O
  • Equipment status, alarms and fault diagnostics
  • Manual/automatic operating-mode coordination
  • Selected drive and power-management interfaces
  • Ergonomic operator workstation configurations
  • Legacy drilling control system upgrades and retrofits

Actual control functions depend on the approved equipment interfaces, control philosophy and project scope.

How Integrated Drilling Control Works

Coordinated Control Across Rig Machinery

Driller Console & HMI

Provides a configurable operator interface for permitted equipment commands, operating status, alarms and diagnostics.

Machinery & Drive Interfaces

Connects approved control and feedback signals from drawworks, top drives, mud pumps and selected rig auxiliary equipment.

PLC, Control Networks & Remote I/O

Industrial controllers and communication networks exchange authorised commands, equipment feedback, permissives and diagnostics.

Interlocks & Operating States

Equipment interlocks, emergency-stop interfaces, operating modes and communication-loss responses are implemented according to the approved control and safety philosophies.

Integrated Drilling Control System Architecture

System ComponentTypical Function
Driller Console & HMIOperator commands, equipment status and alarms
Drawworks Control InterfaceApproved hoisting-system commands, feedback and interlocks
Top Drive InterfaceSelected rotary-drive commands, status and diagnostics
Mud Pump InterfacePump-control signals, equipment status and operating feedback
PLC & Remote I/OControl logic, field-signal acquisition and interfacing
Industrial Control NetworkCommunication between approved equipment controllers
Alarm & Diagnostic FunctionsFault indication, operating status and event information
Equipment PermissivesDefined conditions governing authorised equipment operations

Drilling Control System Upgrades & Retrofits

Modernising Legacy Rig Control Systems?

Ageing PLCs, unsupported driller consoles, obsolete communication networks and legacy equipment interfaces can complicate rig maintenance and modernisation.

SMEC can assess existing drilling control architecture and develop project-specific upgrade solutions, including:

  • Replacement or modernisation of driller consoles and operator displays
  • PLC, remote I/O and industrial network upgrades
  • Integration with compatible existing OEM machinery controllers
  • New equipment interface and diagnostic configurations
  • Control-system modifications during rig refurbishment and reactivation

Retrofit feasibility depends on OEM interfaces, equipment condition, approved control logic, safety requirements and available shutdown windows.

Discuss a Rig Control System Retrofit

Applications

  • Onshore Drilling Rigs
  • Offshore Jack-Up Rigs
  • Rig Automation Upgrades
  • Driller Console Replacement
  • Rig Refurbishment & Reactivation

SMEC Engineering, Testing & Commissioning

SMEC supports control architecture development, OEM interface review, PLC/HMI engineering, panel integration, control-network configuration, alarm and interlock engineering and project-specific technical documentation.

Depending on scope, delivery may include Factory Acceptance Testing (FAT), control-logic simulation, site installation support, Site Acceptance Testing (SAT), commissioning and lifecycle technical support.

Safety-related functions, emergency-stop arrangements and OEM equipment protections require appropriate engineering assessment, validation and approvals.

Frequently Asked Questions

What is an Integrated Drilling Control System?

An Integrated Drilling Control System coordinates selected rig machinery commands, operator interfaces, equipment feedback and control interlocks through a common architecture. It can connect driller consoles with approved interfaces for drawworks, top drives, mud pumps and auxiliary equipment.

Can an Integrated Drilling Control System replace an existing rig control system?

Yes, subject to engineering assessment. SMEC can evaluate obsolete PLCs, operator consoles, communication networks and machinery interfaces for partial modernisation or replacement. The final scope depends on existing OEM equipment, control architecture and safety requirements.

Can existing OEM drilling equipment controllers be retained?

Yes, where technically compatible and permitted by the equipment manufacturer and project requirements. Existing machinery controllers may be retained while upgrading operator interfaces, communication networks or selected control components.

Which drilling equipment can be integrated?

Depending on the approved project scope, integration may include drawworks, top drives, mud pumps, selected auxiliary machinery and associated drive or power-system interfaces. Each connection requires review of commands, feedback, permissives and equipment protection requirements.

Is the system suitable for onshore and offshore drilling rigs?

The architecture can be engineered for onshore rigs and offshore installations, including jack-ups. Equipment selection, hazardous-area suitability, environmental requirements and applicable approvals depend on the rig configuration.

Other SMEC systems

Every system is built to the rig it serves and integrated with the rest of the installation.

All systems

Request an Integrated Drilling Control System Assessment

Upgrading a Driller Console or Modernising Rig Automation?

Share the rig type, existing control-system make and model, OEM equipment details, control architecture, interface drawings and proposed upgrade scope.

Submit RFQ