Middle EastSMEC Oil & Gas Solutions LLCinfo@smecong.com+971 50 249 1903

IndiaSMEC Automation Pvt Ltdsales@smecong.com+91 86060 47714

Electrical & Automation

Instrumentation

Instrumentation connects the physical process to control and safety systems. SMEC supports instrument selection/interface engineering, I/O and loop documentation, junction boxes, marshalling/interface panels, installation support, calibration, loop checks and commissioning.

Four stainless-steel RPD monitoring panels in a row on a workshop floor, each with a dark window over its indicator display
Instrumentation

Explore engineering capabilities

Technical scope

  • Pressure, temperature, level and flow interfaces
  • Gas detection and selected analyzer interfaces
  • I/O lists and instrument index support
  • Loop drawings and hook-up documentation
  • JB/marshalling/interface panels
  • Calibration, loop checks and SAT

Applications & Systems

Select a related system to open its dedicated product or system page.

Project evidence

  • Case studyPetroleum installation

    Petroleum Installation — Automatic Fire Fighting System with Redundant SIL PLC and SCADA

    Problem · SMEC scope · Architecture · Testing
    Problem
    The facility needed an automatic fire fighting system where a failure in the suppression logic, signal loss over long cable runs, inconsistent pressure data or a clogged solenoid valve could not be allowed to compromise the response to a fire.
    SMEC scope
    SMEC supplied and installed redundant SIL PLC control panels integrated with a SCADA system, signal, control and optical fiber cabling, pressure transmitters and solenoid valves, and carried out the civil works — cable trays and panel foundations — within the timeline.
    Architecture
    Dual-redundant SIL-rated PLC panels with automatic switchover on panel or logic failure, integrated with SCADA; cabling and fiber routed to minimise EMI between valves, transmitters and PLCs; solenoid valves with upstream strainers and filters.
    Testing
    Pressure transmitters calibrated to OEM standards and verified through simulation testing; the system was erected, tested and commissioned, and the client certified the work complete.

Common questions

Can existing instruments and electrical equipment be retained?

Following a site and documentation review, equipment can be assessed for compatibility, condition, safety requirements and retrofit feasibility.

Have an Instrumentation project to discuss?

Share the existing equipment, drawings, project location and scope of work.

Send the P&IDs, instrument index, I/O list and hazardous-area requirements. Recommended RFQ inputs: project/asset, existing OEM/model, scope, drawings or specification, required date, site location, and any shutdown/mobilization constraint.

Submit RFQ